Max.Head: | >150m |
---|---|
Max.Capacity: | >400 L/min |
Driving Type: | Motor |
Material: | Cast Steel |
Structure: | Multistage Pump |
Assembly: | Liquid Pumps |
Customization: |
---|
Suppliers with verified business licenses
AY,YY type Multi-stage centrifugal oil pump
Application:
AY ,YY type multistage centrifugal pump series is designed on the basis of old Y type multistage centrifugal pump by introducing foreign advanced technology.It is to better meet the needs of users.To improve reliability and energy saving as the center of the equipment, upgrading and development of new products.This series of products can be used in petroleum refining, petrochemical and chemical industry, transport does not contain solid particles of petroleum, liquefied petroleum gas and other flammable or toxic high temperature and high pressure liquid.Its features are:
All the bearing parts adopt advanced sliding bearing and axial thrust bearing.
The hydraulic flow components adopt the hydraulic model of high-efficiency energy-saving pump, whose efficiency is 2-5% higher than that of y-type pump on average.
In order to maintain the inheritance, the structural form, installation size and performance parameters of AY and YY type oil pump are basically the same as those of Y type oil pump.
Parts and components are highly versatile.
According to different conditions of use, the main parts are made of class II and III materials, and the bearing and other parts are made of cast steel and cast iron.For cold areas, open - air use, Marine and other materials to provide convenient.
Performance range:
Capacity(Q): 3-155m3/h
Head(H): 70-603m
Liquid temperature(T): 20-300ºC
Model :
50 AY 35X7
50: suction diameter(mm)
A: first conversion
Y: centrifugal oil pump
35: single stage head
7: series
Pump structure:
AY and YY type multistage centrifugal pump is of radial segmenting structure, and the suction section, the middle section and the discharge section are connected into a whole through the bar.Pump rotor is mounted on the shaft impeller, balance disk (drum) and other parts.The axial force is balanced by balance disc, balance drum and thrust bearing.
Bearings: radial bearings adopt centripetal ball bearings or sliding bearings, and thrust bearings adopt centripetal thrust ball bearings.Thrust bearings are used to balance residual axial forces.
Shaft seal: packing seal or mechanical seal, according to the needs of users.
Transmission: the pump is directly driven by the prime mover through the flexible diaphragm coupling. From the prime mover, the pump rotates counterclockwise.
Piping system:
Cooling water is according to the medium temperature and use requirements, the shaft seal cavity, bearing or pump support for cooling.The recommended water amount for each pipe is 0.2-0.5m3/h, and the pressure is 0.2-0.3mpa.Sealing flushing is based on pump medium temperature and pressure and other working conditions are different.The liquid sealing capacity of each pump chamber is shown in the table below (internal or external supply is acceptable).
Nominal seal diameter(mm) | 13-47 | 48-59 | 60-84 | 85-95 | 96-133 |
Average seal volume(m3/h) | 0.18 | 0.24 | 0.36 | 0.48 | 0.66 |
The pressure of the sealing fluid is generally higher than that of the sealing chamber, which is 0.07-0.1mpa. If the conveying medium is easily gasified, it should be higher than that of the gasification pressure, which is 0.175-0.2MPa.The vapor pipeline is equipped when the temperature of the conveying medium decreases and crystals are separated out, and the pressure is about 0.1MPa.
Structural drawing of AY type multi-stage oil pump
40AY35,50AY35
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
Rotor part | Bearing part | Mechanical seal | Suction stage | Middle stage | diffuser | Balance pipe | Middle stage sealing ring |
9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 |
Impeller sealing ring | Discharge stage | Balance sleeve | Shaft seal | End cover | poles | Suction function body |
1 | 2 | 3 | 4 | 5 | 6 | 7 |
Rotor part | Bearing part | Mechanical seal | Suction stage | Middle stage | diffuser | Middle stage sealing ring |
8 | 9 | 10 | 11 | 12 | 13 | 14 |
Balance pipe | Discharge stage | Balance sleeve clamp | Balance sleeve | poles | Impeller sealing ring | Diffuser sealing ring |
Material data:
Material classes | II | III | |
Liquid temperature | -45ºC~300ºC | -45ºC~300ºC | |
Parts name | Casing(body and cover) | ZG230-450 | ZG1Cr13Ni |
impeller | ZG230-450 | ZG1Cr13Ni | |
shaft | 35MrMo | 35MrMo | |
Casing sealing ring | ZG1Cr13MoS | ZG1Cr13MoS | |
Balance disc(drum) | ZG1Cr13NiMo | ZG1Cr13NiMo | |
diffuser | ZG230-450 | ZG1Cr13Ni |
Outline drawing size:
Company picture:
For more details (AY/YY oil pump) , pls contact with us!
Suppliers with verified business licenses